Call
Info

Hose Menders

Products 1-13 of 13
Show
Brass 5/8" Hose Mender
Price: $3.55
Item #: BM5 -
Availability: In Stock
View
Availability: In Stock
Item #: BM5 -

Brass 5/8 inch hose mender. All standard hose fittings are intended for use with hose clamps or crimped ferrules.WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

Brass 3/4" Hose Mender
Price: $3.82
Item #: BM6 -
Availability: In Stock
View
Availability: In Stock
Item #: BM6 -

Brass 3/4 inch hose mender. All standard hose fittings are intended for use with hose clamps or crimped ferrules.WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

Brass 1" Hose Mender
Price: $7.22
Item #: BM8 -
Availability: In Stock
View
Availability: In Stock
Item #: BM8 -

Brass one inch hose mender. All standard hose fittings are intended for use with hose clamps or crimped ferrules. WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

1" Zinc Hose Mender
Price: $4.13
Item #: DM11 -
Availability: In Stock
View
Availability: In Stock
Item #: DM11 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

1 1/2" Steel 2 Clamp King Hose Mender
Price: $6.60
Item #: KM121 -
Availability: In Stock
View
Availability: In Stock
Item #: KM121 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

1 1/2" Steel 4 Clamp King Hose Mender
Price: $12.32
Item #: KM122 -
Availability: Limited Stock
View
Availability: Limited Stock
Item #: KM122 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

1 1/2" Zinc Hose Mender
Price: $7.62
Item #: DM21 -
Availability: In Stock
View
Availability: In Stock
Item #: DM21 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

2" Zinc Hose Mender
Price: $8.08
Item #: DM26 -
Availability: In Stock
View
Availability: In Stock
Item #: DM26 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

2 1/2" Zinc Hose Mender
Price: $13.67
Item #: DM31 -
Availability: In Stock
View
Availability: In Stock
Item #: DM31 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

3" Zinc Hose Mender
Price: $13.95
Item #: DM36 -
Availability: In Stock
View
Availability: In Stock
Item #: DM36 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

4" Zinc Hose Mender
Price: $27.15
Item #: DM46 -
Availability: In Stock
View
Availability: In Stock
Item #: DM46 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

5" Zinc Hose Mender
Price: $77.77
Item #: DM51 -
Availability: In Stock
View
Availability: In Stock
Item #: DM51 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.

6" Zinc Hose Mender
Price: $60.25
Item #: DM66 -
Availability: In Stock
View
Availability: In Stock
Item #: DM66 -

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.