Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure. Meet Forest Service Spec 5100-107. Female 3/4” GHT and a Male 1” NPSH. Meets National Fire Equipment System (NFES #2235). Water-Handling Accessories flow rates are 100 psi flowing pressure. Fire hose reducer female adapters comes with a gasket. National Stock Number (NSN 4210-01-080-6531) This Wildland Fire Equipment adapter or coupling is used by the U.S. Forest Service (USFS), Bureau of Land...

Task Force Tips rocker lug fire hose adapter shall be configured with a 3/4" female garden hose thread (GHT) and a 1" male NPSH threads. TFT AA series threaded adapters are designed for pressure or vacuum service on a fire hydrant, pumper or on the ground. Their maximum operating pressure is 300 psi (20 bar) and they are compliant to NFPA 1964 2018 edition which dictates a 900 psi (62 bar) hydrostatic strength test. The aluminum parts are hardcoat anodized per MIL-A-8625F Type III, Class 2 for...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure. Meet Forest Service Spec 5100-107. Female 1", 11-1/2 NPSH and male 3/4", GHT (garden Hose Thread). Meets National Fire Equipment System (NFES #0733). Water-Handling Accessories flow rates are 100 psi flowing pressure. Fire hose reducer female adapters comes with a gasket. National Stock Number (NSN 4210-01-079-9286) This Wildland Fire Equipment adapter or coupling is used by the U.S. Forest Service...

Task Force Tips rocker lug fire hose adapter shall be configured with a 1" female NPSH thread rigid rocker lug and a 3/4" male garden hose threads (GHT). TFT AA series threaded adapters are designed for pressure or vacuum service on a fire hydrant, pumper or on the ground. Their maximum operating pressure is 300 psi (20 bar) and they are compliant to NFPA 1964 2018 edition which dictates a 900 psi (62 bar) hydrostatic strength test. The aluminum parts are hardcoat anodized per MIL-A-8625F Type...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure. Meet Forest Service Spec 5100-107. Female 1", 11-1/2 NPSH and male 1-1/2", 9 NH. Meets National Fire Equipment System (NFES #0416). Water-Handling Accessories flow rates are 100 psi flowing pressure. Fire hose reducer female adapters comes with a gasket. National Stock Number (NSN 4210-01-080-6532) This Wildland Fire Equipment adapter or coupling is used by the U.S. Forest Service (USFS), Bureau of...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure. Meet Forest Service Spec 5100-107. Female 1-1/2", 9 NH and male 1", 11-1/2 NPSH. Meets National Fire Equipment System (NFES #0010). Water-Handling Accessories flow rates are 100 psi flowing pressure. Fire hose reducer female adapters comes with a gasket. National Stock Number (NSN 4210-00-975-2969) This Wildland Fire Equipment adapter or coupling is used by the U.S. Forest Service (USFS), Bureau of...

Task Force Tips rocker lug fire hose adapter shall be configured with a 1-1/2" female NH and a 1" male NPSH threads. TFT AA series threaded adapters are designed for pressure or vacuum service on a fire hydrant, pumper or on the ground. Their maximum operating pressure is 300 psi (20 bar) and they are compliant to NFPA 1964 2018 edition which dictates a 900 psi (62 bar) hydrostatic strength test. The aluminum parts are hardcoat anodized per MIL-A-8625F Type III, Class 2 for maximum corrosion...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure. Meet Forest Service Spec 5100-107. Female 1-1/2", 11-1/2 NPSH and male 1", 11-1/2 NPSH. Meets National Fire Equipment System (NFES #0418). Water-Handling Accessories flow rates are 100 psi flowing pressure. Fire hose reducer female adapters comes with a gasket. National Stock Number (NSN 4210-00-294-2648) This Wildland Fire Equipment adapter or coupling is used by the U.S. Forest Service (USFS),...

Task Force Tips rocker lug fire hose adapter shall be configured with a 1-1/2" female NPSH and a 1" male NPSH threads TFT AA series threaded adapters are designed for pressure or vacuum service on a fire hydrant, pumper or on the ground. Their maximum operating pressure is 300 psi (20 bar) and they are compliant to NFPA 1964 2018 edition which dictates a 900 psi (62 bar) hydrostatic strength test. The aluminum parts are hardcoat anodized per MIL-A-8625F Type III, Class 2 for maximum corrosion...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure. Meet Forest Service Spec 5100-107. Female 1-1/2", 9 NH and male 1-1/2", 11-1/2 NPSH. Meets National Fire Equipment System (NFES #0006). Water-Handling Accessories flow rates are 100 psi flowing pressure. Fire hose reducer female adapters comes with a gasket. National Stock Number (NSN 4210-01-079-9284) This Wildland Fire Equipment adapter or coupling is used by the U.S. Forest Service (USFS), Bureau...

Task Force Tips rocker lug fire hose adapter shall be configured with a 1-1/2" female NH and a 1-1/2" male NPSH threads. TFT AA series threaded adapters are designed for pressure or vacuum service on a fire hydrant, pumper or on the ground. Their maximum operating pressure is 300 psi (20 bar) and they are compliant to NFPA 1964 2018 edition which dictates a 900 psi (62 bar) hydrostatic strength test. The aluminum parts are hardcoat anodized per MIL-A-8625F Type III, Class 2 for maximum...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure. Meet Forest Service Spec 5100-107. Female 1-1/2", 11-1/2 NPSHH and male 1-1/2", 9 NH. Meets National Fire Equipment System (NFES #0007). Water-Handling Accessories flow rates are 100 psi flowing pressure. Fire hose reducer female adapters comes with a gasket. National Stock Number (NSN 4210-01-079-9283) This Wildland Fire Equipment adapter or coupling is used by the U.S. Forest Service (USFS),...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.

Task Force Tips rocker lug fire hose adapter shall be configured with a 1-1/2" female NPSH and a 1-1/2" male NH threads. TFT AA series threaded adapters are designed for pressure or vacuum service on a fire hydrant, pumper or on the ground. Their maximum operating pressure is 300 psi (20 bar) and they are compliant to NFPA 1964 2018 edition which dictates a 900 psi (62 bar) hydrostatic strength test. The aluminum parts are hardcoat anodized per MIL-A-8625F Type III, Class 2 for maximum...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Download Spec Sheet ...

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.