Call
Info

White 1 1/2" x 50' Double Jacket Fire Hose (Brass NPSH Couplings)

Price: Price: $149.17
Free Shipping On Orders Over $100
    Item Number: 15D850BP
    Availability: Limited Stock
    Usually ships In 1 Business Day

    Only 9 Left In Stock
    Weight: 18.00 Lbs

    Quantity:
    • Made in the USA
    • Hose Size - 1.5 inches (Inside Diameter)
    • Hose Length - 50 feet (Approximately)
    • Male Coupling - Brass 1.5 inch NPSH
    • Swivel Female Coupling - Brass 1.5 inch NPSH
    • The Female Coupling Will Only Connect To A Male 1.5 inch NPT or NPSH
    • Compatible Nozzle - 1.5 inch NPSH only
    • Hose Type - Polyester Double Jacket (Mildew Resistant)
    • Color - White
    • Liner - EPDM Rubber
    • Approximate Width Laying Flat - 2.75 inches
    • Service Pressure - 400 PSI
    • Proof Test Pressure - 800 PSI
    • Burst Test Pressure - 1200 PSI
    • UL Listed

    Our "Made in the USA" double jacket lay-flat hose meets and exceeds all NFPA 1961 standards. This hose is constructed of an EPDM synthetic rubber tube and a double layer of 100% polyester woven jackets. The rubber lining is a single-ply extruded tube of synthetic EPDM compounded to resist ozone. Double jacket refers to the second layer polyester covering woven from staple polyester yarn added for increased abrasion resistance.

    How To Purchase Fire Hose

    • Always ask where the hose is manufactured - Buy American!
    • Adding color impregnation improves durability compared to untreated white hose
    • 50 foot lengths are easier to handle and offer more layout flexibility vs. 100 foot lengths
    • The most common hose, thread and couplings in use by fire departments today is double jacket hose with aluminum NH / NST
    • Double jacket hose with any color is the most durable hose available

    Applications

    • De-contamination / Wash Down
    • Corrosive Environments
    • Salt Water Environments
    • Chemical Fire Protection

    Test Ratings (Water Only With Expansion Ring Couplings)

    • Service Pressure (A 3-minute hydrostatic test conducted by users on in-service hose to determine suitability for continued service)
    • Proof Test Pressure (A pressure equal to a least two times the service test pressure)
    • PSI Burst Test Pressure

    Download Spec Sheet

    1 1/2" Hose Male Couplings

    • Inside diameter of a male coupling - 1 1/2" inches
    • Outside diameter of a male NH / NST coupling - 1.99 inches (9 Threads per inch)
    • Outside diameter a male NPSH or NPT coupling - 1.87 inches (11.5 Threads per inch)

    Connections

    • The female side of a NH / NST coupling will only connect to a male NH / NST connection
    • The male side of a NH / NST coupling will only connect to a female NH / NST connection
    • The female side of a NPSH coupling will only connect to a male NPT pipe or a male NPSH connection
    • The male side of a NPSH coupling will only connect to a female NPSH connection. It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.
    • The female side of a garden hose will only connect to a male garden hose connection.
    • The male side of a garden hose will only connect to a female garden hose connection.

    The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST

    Any hose found to be defective due to materials and / or workmanship shall be replaced at no charge up to ten years. In general, hose warranties cover manufacturing defects leading to hose failure. Wear through and abuse are not covered by warranty.